Flue Chimney Fan EKOVENT BLAZER 5 Magnetic Extra Powerful

Flue Chimney Fan EKOVENT BLAZER 5

A flue chimney fan is an excellent alternative for stoves that do not allow the placement of a fan on a hot surface due to its curvature, or multi-wall stoves that do not reach the surface temperature required for the fan´s optimal performance.

A flue chimney fan is an ideal solution for cost-saving heating with fireplace stoves or fireplaces. By using a flue chimney fan, you will achieve a pleasant sense of warmth and increase the overall efficiency of your stove.

The fan ensures and maintains horizontal air circulation. Instead of the natural rise of warm air, the fan evenly disperses warm air throughout the room, even around corners.

The fan requires no external power source; its operation is automatic. The smart fan is independent of any manual operation; it starts spinning on its own with the heat from the stove and automatically turns off when the stove cools down. The fan blade speed adjusts automatically based on the stove temperature—the higher the stove temperature, the faster the blade spins.

The fan is able to work even at low temperatures. The fan propeller starts to rotate at a temperature of about 50°C measured on the fan, which corresponds to a temperature of about 120°C measured on the flue. It therefore spins shortly after heating, which accelerates the heating of the entire room and, on the other side, can raise the temperature by up to several degrees. For ideal operation of the fan, the temperature of the flue should reach temperatures in the range of 130 °C - 250 °C.

The fan is attached using a curved magnetic arm to a flue with a diameter of approximately 160 mm. If the flue has a larger or smaller diameter or is non-magnetic, the fan is secured using the supplied tightening straps. The straps are designed for diameters ranging from 155 to 178 mm. In the case of a larger flue diameter, additional securing straps can be purchased at any hardware store.

Main Technological Advantages of Our Fans:

The functional design of the fan is based on the latest theories and laws of aerodynamics, developed in collaboration with the manufacturer.

The fan´s duralumin body conducts heat exceptionally well, providing the foundation for the fan´s efficiency and performance. The broad base maximizes heat transfer. Cooling fins are located at the top to cool the upper side of the thermoelectric module. Since the performance of the thermoelectric module depends on the temperature difference between its upper and lower sides, the fan´s body construction is crucial.

A highly efficient thermoelectric module has been adapted to the fan´s design and parameters according to our request, directly from the manufacturer of Peltier cells. As a result, its energy performance corresponds to the motor´s energy requirements and the resistance of the blades, achieving high efficiency surpassing other thermoelectric modules on the market.

The motor commonly used for these fans usually has a commutator with copper brushes. Our motor uses carbon brushes, significantly increasing its lifespan and, most importantly, its performance.

The fan blade design is precisely crafted according to aerodynamic laws, allowing the fan to convert all generated energy into airflow without unnecessary losses.

Our EKOVENT fan
- it is designed for a flue surface temperature of 110 °C - 320 °C
- which corresponds to the working temperature of the thermoelectric module 50 °C - 340 °C
- the ideal flue temperature for fan operation is between 130 °C - 250 °C
- has an air flow of up to 480 m3/hour.
- does not need power supply, generates its own electricity by using the heat from the stove
- helps the circulation of warm air in the room
- it has a fan that spins automatically and changes speed according to the temperature of the stove. The higher the temperature, the faster the propeller spins
- can also become a perfect gift for the owner of a fireplace or stove

Parameters:
Dimensions including propeller: H. 16 cm * W. 16 cm * D. 15 cm
Dimensions of the body: H. 15 cm * W. 13 cm * D. 12 cm
Weight: 593 g
Blades: Black, 5 leaves

Package includes:
1 x Eco-friendly Flue Fan EKOVENT Magnetic
2 x Steel tightening strap 
1 x User Manual

Need advice on choosing the right fan? Find information on selecting the right Ecovent fan here: How to Choose the Right Type of Ecovent Fan?